Radiopaque Calcium Hydroxide Composition
Get flat 7% off on every purchase for minimum spent of 10000/-
Get flat 5% off on every purchase for minimum spent of 7500/-
Get flat 3% off on every purchase for minimum spent of 5000/-
Get Flat Rs 100/- off as welcome bonus on minimum purchase of Rs 2000/-
Radiopaque
Higher compressive strength
Lower solubility
Quick set time and excellent handling characteristics
Mixing time: 10 seconds
Working time: 2 minutes 20 seconds
Setting time: 2½ to 3½ minutes
Mixing Ratio: Base:Catalyst 1.17g : 1.0g
Preparation: Begin by ensuring that the tooth requiring treatment is clean and isolated from moisture.
Mixing: Dentsply Dycal is supplied as a powder and liquid, which need to be mixed together prior to application. Follow the manufacturer’s instructions regarding the specific ratios and mixing technique. Typically, a small amount of the powder is dispensed onto a mixing pad or glass slab, and the appropriate amount of liquid is added gradually while mixing to achieve a smooth, creamy consistency. Use a spatula to mix the materials.
Application: Once the Dycal mixture is ready, it can be applied to the prepared tooth. This is often done using a suitable dental instrument like a spatula or a suitable applicator tip, as recommended by the manufacturer. Carefully place the material onto the desired area, ensuring proper coverage.
Setting: Dentsply Dycal is a self-setting material that hardens over time. The setting time can vary, so refer to the manufacturer’s instructions for the specific product you are using. It’s essential to allow enough time for the material to set completely before proceeding with further dental procedures.
Additional steps: Depending on the dental procedure being performed, additional steps may follow the application of Dentsply Dycal. This could involve placing a liner or base material over the Dycal layer, followed by restoration with a filling material or crown.
January,2028
No, Dentsply Dycal cannot be used as a root canal sealer, as it is primarily designed for pulp-capping and as a protective base/liner under dental filling materials.
Dentsply Dycal is a dental material used for pulp capping and dentin-pulp complex protection. It is often used in procedures where the dental pulp (nerve) is exposed or at risk of exposure, such as deep cavities or trauma to the tooth.
Yes, Dentsply Dycal can be used in pediatric dentistry. It is commonly used for pulp capping in primary (baby) teeth to help protect the pulp and promote healing.
The setting time of Dentsply Dycal can vary depending on the specific product and environmental factors. It is important to refer to the manufacturer’s instructions for the recommended setting time.
Yes, Dentsply Dycal can be used in direct pulp capping procedures. It helps provide a protective barrier and supports the healing of the dental pulp when the pulp is exposed or nearly exposed.
The duration for which Dentsply Dycal should be left in place can vary depending on the specific case and treatment plan. Your dentist will determine the appropriate time for removal or further treatment based on individual circumstances.
Dentsply Dycal is considered safe when used according to the manufacturer’s instructions. However, as with any dental material, it should be used by trained dental professionals who understand its indications, contraindications, and potential risks.
Yes, Dentsply Dycal can be used in conjunction with other dental materials. It is often covered with a liner or base material before the final restoration, such as a dental filling or crown.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.