Versatile, reliable, and sensitive-free dental adhesive with active moisture control
Active moisture control – Reliable bonding performance, no matter if the dentin is still too wet or already too dry – for virtually no post-operative sensitivity.
Active cavity spreading – Actively spreads in the cavity and helps to cover all cavity surfaces.
Self levelling – The adhesives self-levels to form a smooth and uniform adhesive layer, helping to avoid dry spots or adhesive pooling.
Low film thickness – Adhesive pools can show up as translucent areas on a radiograph, which can easily be misdiagnosed as a void. Thick adhesives may also change crown prep geometry impacting crown fit.
Versatility: It can be used with all etching methods and for all indications, making it suitable for a wide range of dental procedures.
Reliable performance: It demonstrates reliable bonding performance even on dentin that is overly wet or dry, ensuring consistent results.
Minimal post-operative sensitivity: The adhesive formulation minimizes the risk of post-operative sensitivity, providing comfort to the patient after the procedure.
Low film thickness: The adhesive has a low film thickness, reducing the chances of pooling and misfit of the restoration, which can compromise the final result.
Extended working time: Prime & Bond Universal remains usable for 30 minutes in a closed CliXdish, providing a relaxed working time and reducing waste.
High initial bond strength: When used with Calibra Ceram cement for indirect restorations, it offers high initial bond strength, ensuring the longevity of the restoration.
Free of certain chemicals: The patented formulation of Prime & Bond Universal is free of HEMA (2-hydroxyethyl methacrylate), TEGDMA (triethylene glycol dimethacrylate), or bisphenol, addressing concerns related to these substances.
1 x 4ml Bottle
Prepare the tooth surface according to the specific dental procedure.
Ensure that the tooth surface is clean and free from debris.
Apply an appropriate etching method based on the indication and follow the manufacturer’s instructions.
Rinse the etchant thoroughly and dry the tooth surface gently using oil-free, moisture-free air.
Shake the bottle of Prime & Bond Universal adhesive well before use.
Dispense a small amount of the adhesive onto a disposable mixing well or other suitable containers.
Apply a thin, even layer of Prime & Bond Universal adhesive to the prepared tooth surface using an applicator or brush.
Ensure complete coverage of the surface, including dentin and enamel.
Allow the adhesive to dwell on the tooth surface for the recommended time as specified by the manufacturer.
Use gentle air pressure or a gentle stream of oil-free, moisture-free air to evaporate the solvent and water from the adhesive layer.
Do not over-dry the adhesive; a slightly moist surface is desirable.
Proceed with the placement of the restorative material according to the specific procedure.
April, 2026
Answer: Dentsply Prime & Bond Universal provides an extended working time of 30 minutes in a closed CliXdish, allowing for relaxed and efficient application while minimizing waste.
Answer: No, Dentsply Prime & Bond Universal is free of HEMA, TEGDMA, and bisphenol, addressing concerns related to these substances. Its patented formulation ensures patient safety and comfort during dental procedures
Answer: The low film thickness of Dentsply Prime & Bond Universal reduces the chances of adhesive pooling and misfit of the restoration. This helps prevent translucent areas on radiographs that could be misdiagnosed as voids and ensures optimal crown fit.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.