Handpiece sterilization

Preset solution volume based on handpiece type for precise and thorough lubrication
Chuck cleaning function for complete removal of dirt and cutting powder from the chuck
Purging select mode with adjustable purge lengths for comprehensive maintenance
Integrated 1-liter solution tank reduces the need for frequent refilling
Easy and clean refills with the enclosed nozzle
Alarm LED alerts for inadequate solution quantity and unlocked front door for safe maintenance
Automatic maintenance for up to four handpieces simultaneously
Simple setup and space-efficient design for easy installation in any workspace

Power Supply: AC 100-240V 50/60Hz
Air Pressure: 0.5 – 0.6 MPa (5.0 – 6.0 kgf/cm 2)
Weight: 6.5 kg (C2 type/C3 type)
Dimension (mm) : W280 x D240 x H350
Solution Tank Capacity: 1,200 mL
Connects only to Midwest 4-hole type
Air piping is necessary (5.0 – 6.0 kgf/cm2)

Ensure the iCare Complete Set is connected to an AC power supply within the range of 100-240V, 50/60Hz.
Connect the system to an appropriate air pressure source of 0.5-0.6 MPa (5.0-6.0 kgf/cm²).
Install the iCare Complete Set in a suitable location, considering its dimensions of W280 x D240 x H350 mm and space efficiency.
Fill the solution tank with a maintenance solution of your choice, utilizing the 1-liter capacity.
Select the appropriate handpiece type (high-speed or low-speed) to preset the proper solution volume.
Place up to four handpieces in the system for simultaneous automatic maintenance.
Initiate the maintenance process at the touch of a button, ensuring thorough cleaning and lubrication.
Use the chuck cleaning function to remove dirt and cutting powder from the chuck of each handpiece.
Monitor the alarm LED for alerts regarding inadequate solution quantity or an unlocked front door to ensure safe and secure maintenance.
Periodically clean the iCare Complete Set, including the removable front door, for efficient operation and hygiene maintenance.