Maarc MTA

COMPOSITION:

• Tricalcium silicate
• Dicalcium silicate
• Tricalcium aluminate
• Calcium oxide
• Radiopacifier and modifiers in traces

SPECIFICATIONS:

• Working Time: Approx 4 mins
• Initial setting: 15 mins at room temperature and it attains strength to continue the treatment
• Strength on setting: 60 MPa

MTA (Mineral trioxide Aggregate ) – Kit

• 1 x 500mg Powder
• 1 x 5ml Liquid

• Sterile glass slab, spatula and all instruments for the insertion of MAARC
• Dispense Powder as per requirement and a drop of distilled water till the hydrated. (Liquid provided)
• The MTA paste is obtained by mixing powder and liquid to obtain putty like consistency.
• The mix is then placed in the desired location
• Condensed lightly with a moistened cotton pellet.

Warning and Precautions:

• MAARC MTA repair material must be stored
• It must be kept in its sealed packaging prior to use to avoid degradation by moisture.
• It must be placed intra-orally immediately after mixing with liquid, to prevent dehydration.
• Avoid skin contact to prevent irritation and possible Allergic response. If contact with skin occurs, immediate Remove material with cotton and wash thoroughly.
• In case of skin sensitization or rash, discontinue use and seek medical attention.
• Do not use MAARC MTA to fill root canal, its viscosity And setting time are inadequate for this procedure also it will be very difficult to remove in case of
• Excess of MAARC MTA is not intended as it may impair healing process
• Do not use it on patients with reported sensitivity to any of the component.

Dec 2026