GDC Scalpel Handles (Bp Handle)
Scalpel Handles are intended to be used with surgical blades for tissue separation and other procedures that require a sharp surgical blade to puncture or cut.The scalpel Handle holds the scalpel blade, it is a small and extremely sharp instrument used for surgery and anatomical dissection. Scalpel Handle Gripping:
Palmar Grip:
The handle is held with the second through fourth fingers and secured along the base of the hand thumb, with the help of the index finger extended along the top rear of the blade and the thumb along the side of the handle. This grip is best for initial incisions and larger cuts. This is also known as the dinner knife grip.
Pencil Grip:
The scalpel is held with the tips of the first and second fingers and the tip of the hand thumb with the handle resting on the fleshy base of the index finger and thumb. Care should be taken not to allow the handle to rest too far along with the index finger as this promotes an unstable grip.
GDC Scalpel Handle Straight 14.5cm (10-130-5EM)
Ergonomic design An interchangeable handle of a scalpel designed to mount a compatible blade. Together, this device and the blade, become a single-bladed surgical instrument used for cutting or dissecting tissue.
GDC Scalpel Handle No. 4 (13.5cm) (10-100-04e)
Flat no.4 An interchangeable handle of a scalpel designed to mount a compatible blade. Together, this device and the blade, become a single-bladed surgical instrument used for cutting or dissecting tissue.
GDC Scalpel Hollow Handle – 4 (14.5cm) (10-130-5em)
Ergonomic design An interchangeable handle of a scalpel designed to mount a compatible blade. Together, this device and the blade, become a single-bladed surgical instrument used for cutting or dissecting tissue.
GDC Scalpel Handle No. 7 (16.5cm) (10-100-07e)
Slim elongated handle. An interchangeable handle of a scalpel designed to mount a compatible blade. Together, this device and the blade, become a single-bladed surgical instrument used for cutting or dissecting tissue.
GDC Scalpel Handle With Scale – No. 3 (12.5cm) (10-130-03e)
Flat no.3 with measure/graduation (mm) An interchangeable handle of a scalpel designed to mount a compatible blade. Together, this device and the blade, become a single-bladed surgical instrument used for cutting or dissecting tissue.
GDC Scalpel Handle No. 3 (12.5cm) (10-130-03)
Flat no.3 An interchangeable handle of a scalpel designed to mount a compatible blade. Together, this device and the blade, become a single-bladed surgical instrument used for cutting or dissecting tissue.
GDC Scalpel Handles Orientable (10-130-180)
This GDC Scalpel Handle is adjustable to different angles to improve access to hard-to-reach areas. Together, this device and the blade, become a single-bladed surgical instrument used for cutting or dissecting tissue.
Uniquely Designed
Cost-effective
Durable
High Quality
Type: BP Handle/Scalpel Handle
Category: Oral Surgery
Material: Stainless Steel
Disposable/Reusable: Reusable
ATTACHING A SCALPEL BLADE
Grip the blade With pliers, or similar, avoiding contact With the cutting edge.
Hold the handle in your left hand With the bayonet fitting uppermost.
Place blade partway over handle fitting and engage slots.
Slide the blade until it clicks into position.
To improve assembly, flex the blade slightly upwards when sliding onto the handle.
DETACHING SCALPEL BLADE
Grip the blade with pliers or similar, at point A making sure that the cutting edge is facing
away from the hand and body.
Ensure the blade is pointing downwards and towards a surface and NOT towards yourself or others.
Whilst holding the handle firmly lift the back edge of the blade With the pliers or forceps and slide away the handle.
The preferred method would be a Swann-Morton blade remover device.
MAINTENANCE INSTRUCTIONS:
Must clean after every use with warm water to remove blood, tissues, and mucus from the instruments.
Ultrasonic cleaning is recommended for all the instruments specially articulated instruments such as forceps, rongeurs, etc.
Use only standard and reputed brands of disinfectant solutions.
The GDC Scalpel Handle (BP Handle) with the code 10-130-5EM is a solid rounded handle that is straight in shape.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.