Shofu composite finishing kit.

Dura-Green silicon carbide stones for adjusting
Dura-White aluminum oxide stones for fine finishing
Contra-Angle and Friction-Grip kits
Your choice of a sterilizable bur block or plastic kit
Fine & smooth finisher & polishers
Ideal to be used for finishing & polishing of composite restorations and GIC
High durable abrasives
Cost effective
Vibration free performance

TECHNICAL SPECIFICATIONS:

Recommended
Rotation Speed Maximum Permissible
Rotation Speed Recommended
Pressure
Dura-Green Stones 5,000 – 20,000 min-1 30,000 min-1 3 – 5 N
Dura-White Stones 5,000 – 20,000 min-1 30,000 min-1 2 N

Begin by selecting the appropriate abrasive stone. Make sure that the stone is the right size and shape for the area that needs to be contoured or finished.
Use a high-speed handpiece with water spray to reduce heat generation and to help control debris.
Place the abrasive stone on the composite filling and gently apply pressure in a back-and-forth motion. Use light pressure to avoid damaging the surrounding tooth structure.
Pay close attention to the contour of the filling and use the abrasive stone to achieve the desired shape and size.
When working on interproximal areas, use a thin abrasive disc or strip to avoid damaging the adjacent tooth surface.
For subgingival areas, use a curved abrasive stone and work carefully to avoid damaging the gums.
Rinse the area frequently with water to remove debris and keep the abrasive stone clean.
Once you have achieved the desired contour and shape, switch to a finer abrasive stone or polishing system to achieve a smooth, glossy finish.
After polishing, evaluate the restoration to ensure it matches the adjacent teeth in terms of contour, size, and shade.
Finally, use a finishing bur to smooth any rough edges or sharp corners that may be present.