Syringes and needles

2ml /5ml Dispo Van syringes with needles are of very high quality
Barrels and plungers are made of non-toxic, medical-grade polypropylene compatible with any medication
The nozzle of the barrel is of luer mount type
Both have a 6% luer taper as per ISO:594
Gaskets are made of natural rubber which is chemically inert and compatible with any medication
This syringe has a clear barrel for visualization of fluid
Has a Textured Thumb Press

Material: Non-toxic, Medical-grade polypropylene
Needle Length: 1.25 Inch
Gauge: 24 Gauge
Unolok Syring: 2.5ml /5ml

Prepare a Sterile Environment:

Ensure you are working in a clean and sterile environment.
Wash your hands thoroughly and put on sterile gloves.
Inspect the Syringe:

Examine the syringe for any visible defects or damage. Do not use if damaged.
Prepare Medication:

Draw up the prescribed medication into the syringe using proper aseptic techniques.
Prepare the Injection Site:

Prepare the patient’s skin at the injection site following standard protocols.
Attach the Needle:

Remove the protective cap from the needle.
Attach the needle securely to the syringe’s Luer-lock or Luer-slip fitting.
Remove Air Bubbles:

Hold the syringe with the needle pointing upward.
Gently tap the syringe to move any air bubbles to the top.
Slowly push the plunger to expel the air bubbles. Ensure the medication fills the needle and no air remains.
Administer the Injection:

Position the needle at the desired injection site.
Insert the needle smoothly and steadily into the patient’s skin.
Inject the Medication:

Slowly depress the plunger to administer the medication.
Ensure steady and controlled delivery.
Withdraw the Needle:

After injection, withdraw the needle gently and steadily from the patient’s skin.
Dispose of the Syringe:

Dispose of the used syringe and needle safely in a designated sharps container according to medical waste disposal regulations.