Codyson Ultrasonic Cleaner CD-4821 (2.5 Litres)

• 1 x Ultrasonic Scaler Unit
• 1 x Top Cover
• 1 x Power Cord
• 1 x Plastic Basket
• 1 x User Manual

(If the unit is turned on without water, ultrasonic energy will not be absorbed. Once over 30 seconds, it may damage the unit or severely reduce the life of the unit.

2. Connect the power cord to an outlet and turn the switch on. LED display shows 05:00. This is the most
commonly used time setting and working state. If the time needs to be adjusted, press Time button and arrow down button. The time can be set between 1 to 30 minutes. Common cleaning time are 5, 10 or 15 minutes.
(Prolonged cleaning time may result in:
a. Loosening of the screws if used.
b. Increasing the pre-existing cracks.
c. Peeling of coating which was already separated.)

3.Press On/Off button to start cleaning.
During cleaning, buzzing sound can be heard from the cleaning tank, indicating the cleaning is underway. Closing the lid will reduce the noise.
LED display will count down to show the remaining cleaning time. When it displays 00:00, the cleaning is done. To stop cleaning at any time, press On/Off button.
(The unit is designed with overheating protection to avoid damage caused by extended and continuous operation. When the red light is on, the unit will not turn on even it is forced to. The unit will idle for about 20 minutes then can be restarted after the green light comes on.)

4.Select one of the four cleaning methods recommended earlier.
a. When the heater is needed, press Heater button, flashes, indicating the heater is turned on. When water temperature reaches 60°C (140°F) the heater will turn off automatically.
(To ensure safety, the unit is designed with dual protections. The heater will be turned off automatically if it has been running for 45 minutes.)
b. To speed up the mixing when solution is used, degas function can be used. Press Time button to set the timer. Press Function button, illuminates. Press On/Off to start degassing. It changes over to normal cleaning after 90 seconds.
C. When debris “smoke” is no longer visible, cleaning is done. If additional cleaning is needed, press Time button to reset the timer and repeat the steps above.

5. When cleaning is completed, turn off the switch, remove the lid and retrieve the items. Pour water out through the pouring recess. Clean and wipe the tank dry.

• Manufacturer/Importer warranty of 1 Year against manufacturing defect
• Service and Warranty are handled by the manufacturer/importer directly for this product
  
• Dentohook will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Dentohook and the Buyer acknowledge that the Products purchased/used are a subject matter of the original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentohook may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered with as the case may be.