Neoendo Neocem Type 1 Glass Ionomer Cement

• Mixing Time – 30 secs
• Working time – 2 mins
• Setting time – 2 mins 30 secs

Intro Pack 

• 1 x 15gm Powder
• 1 x 12gm Liquid

Big Pack

• 1 x 30gm Powder
• 1 x 24g Liquid

• Preparation: Before applying the cement, make sure the tooth is clean and dry. Remove any decay or existing filling material and shape the tooth as needed.
• Mixing: Use the provided mixing pad and spatula to mix the powder and liquid components of the cement together until a homogeneous mixture is achieved. The mixing ratio is 1 scoop (provided) of powder to 1 drop of liquid.
• Application: Apply the cement to the prepared tooth surface with a suitable instrument, such as a dental spatula or applicator. Avoid overfilling the cavity or crown preparation.
• Setting: The cement will begin to set within a few minutes of application. It will befully set in approximately 10 minutes. Do not disturb or manipulate the cement during this time.
• Finishing: Once the cement is fully set, trim any excess material with a dental bur or scaler. Polish the surface of the restoration as needed.
• Post-operative care: Advise the patient to avoid chewing on the restored tooth for at least 24 hours. Provide appropriate post-operative instructions for oral hygiene and follow-up care.