Woodpecker Mini S Light Cure LED

  • Woodpecker Mini S Light Cure LED
  • Woodpecker Mini S Light Cure LED
  • Woodpecker Mini S Light Cure LED

Woodpecker Mini S Light Cure LED

₹6296 ₹2945 53% Off

MINI LIGHT CURE UNIT

Quantity
  • Free Shipping for orders above ₹2000.
  • Readily available - Ships usually within 1-2 working day
  • Expected period for Delivery- 1-2 weeks
  • Category:
  • Brand:woodpecker
Add to Wishlist
Share:
  • Extended Battery Life: Can be used over 300 times with a full charge in the 10-second working time mode.
  • Ergonomic Design: Compact and convenient design for comfortable handling during dental procedures.
  • Efficient Light Filtering: Special light hood and holder design for high-efficiency light filtering.
  • Easy Time Setting: Simple butoon operation for quick and easy time mode selection (5s, 10s, 20s).
  • High Power LED: Features a 3W high power blue light LED with a wavelength range suitable for dental resin solidification.
  • Portable and Lightweight: Compact size and lightweight construction for easy portability and maneuverability.
  • Net weight: 105g
  • Dimensions: 230mm×26mm×30mm
  • Power input: AC100V-240V 50Hz/60Hz
  • Light output: 1000mW/cm² -1200mW/cm²
  • Battery: 3.7V/1400mAh
  • Battery mode: ICR 18490
  • Power Output: DC4.2V/1A
  • Wavelength: 420nm-480nm
  • Light intensity: 1000mW/cm²-1200mW/cm²
  • Light effective acreage: 50mm²
  • 1 x LED curing light
  • 1 x Guide rod tip
  • 1 x Light slides
  • 1 x Power adapter
  • 1 x Lithium battery
  • 1 x Operating manual
  • 1 x Guarantee card
  • Ensure that the MiniS curing light is fully charged before use.
  • Press the butoon on the main unit to turn on the curing light. The blue light will indicate that the device is in operation.
  • Long press the butoon to access the time setting mode. The time indicator will start flashing. Choose the desired time mode (5s, 10s, or 20s) by releasing the butoon when the indicator reaches the desired setting.
  • Aim the blue light at the area that requires resin solidification.
  • Short press the butoon to start the curing process. The main unit will emit a “Bi” sound, and the blue light will radiate, indicating that the solidification process has begun based on the selected time mode.
  • The countdown timer will start, and the light will continue to emit blue light until the set time elapses.
  • To stop the curing process at any time, simply short-press the butoon again.
  • After each working cycle, you can initiate another cycle by short pressing the butoon. If the equipment becomes noticeably hot, allow it to cool down before restarting. It is recommended to limit continuous working cycles to less than 10 times.
  • The main unit has a low-power detection circuit. If low power is detected, the display screen will blink or the buzzer will ring three times. Recharge the device promptly.
  • To charge the battery, connect the adapter’s plug to a power supply and connect the output plug to the main unit’s input plug. The adapter’s charge indicator will change color to indicate the charging status.
  • Clean the optical fiber with a soft cloth after each use to maintain its performance.
  • Manufacturer/Importer Warranty of 1 Year on all the parts of the product & 5 years Warranty (from the date of invoice) on PCB (Power Circuit Board).
  • Physical damage is not cover in any case
  • Service and Warranty are handled by the manufacturer/importer directly for this product
  • Dentohook will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
  • Dentohook and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
  • Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentohook may assist the customer in registering a request to get the Product replaced or serviced. 
  • The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.

Answer: To know when the Woodpecker Mini S Light Cure LED is fully charged, check the adapter charge indicator. A yellow light means it is charging, and a green light indicates that charging is complete.

Answer: To install the optical fiber on the Woodpecker Mini S Light Cure LED, simply align and insert it into the designated slot on the curing unit until it fits securely.

Answer: The MiniS curing light has a low-power detection circuit. When the battery is running low, the display screen of the main unit may blink or the buzzer may ring three times to indicate the low power. It is recommended to recharge the device promptly in such cases.

Answer: To clean the MiniS curing light, use a soft cloth to wipe the surface of the device. Pay attention to cleaning the optical fiber to remove any residue that may affect the light intensity. Avoid using volatile or soluble liquids for cleaning, as they may damage the control panel.

Answer: Under the 10s working time mode, a fully charged MiniS curing light can be used continuously for over 300 times.

Answer: Yes, you can stop the curing process at any time by short pressing the button on the main unit. This provides flexibility and control during dental procedures.
Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

28% Off HEALIX 10 SECONDS LED LIGHT CURING UNIT
Add to Wishlist

HEALIX 10 SECONDS LED LIGHT CURING UNIT

Original price was: ₹4,000.00.Current price is: ₹2,875.00.
36% Off Endoking iCure Light Cure Unit (1 Sec)
Add to Wishlist

Endoking iCure Light Cure Unit (1 Sec)

Original price was: ₹5,000.00.Current price is: ₹3,215.00.
48% Off Woodpecker O LED Plus Light Cure Unit
Add to Wishlist

Woodpecker O LED Plus Light Cure Unit

Original price was: ₹9,900.00.Current price is: ₹5,152.00.