Total
₹1,145.00
Checkout
ET Dental Dispensing Gun works perfectly to dispense dental adhesive, silicones, and dental impression material for perfect registration of bite. This sturdy device is made of high-quality plastic and consists of a release lever with a plunger, which coordinates simultaneously to load and remove the cartridges dispense the required amount of cartridge type vinyl polysiloxane impression and reline materials
Easy mixing and dispensing of the impression material
Excellent quality uniform smooth mix
Suitable for all cartridges.
Automatic mixing and delivery of impression materials made easy with this handgun dispenser
Ratio :
1:4 – The impression gun is used to discharge the crown & bridge materials from cartridges.
1:1/2:1 – The impression gun is used to discharge the impression materials and bite registration materials from cartridges.
Lift the release lever of the dispenser and pull the piston plunger all the way back into the dispenser.
Lift the cartridge holder of the dispenser and load the cartridge ensuring that the V-shaped notch on the flange of the cartridge is facing down. Push down the cartridge holder to fix the cartridge.
Lift the release lever and push the piston plunger forward until it engages into the cartridge.
Remove the cartridge cap by rotating 1/4 turn anti-clockwise, tilt the cap downward and peel it away from the cartridge. Gently squeeze the dispenser handle to extrude a small amount of material from the two openings at the end of the cartridge. Make sure that base and catalyst come out evenly.
Align the V-shaped notch on the rim of MIXING TIP II to the V-shaped notch between the cartridge barrels. Push firmly to attach the mixing tip. Then, rotate the colored collar of the mixing tip 1/4 turn clockwise to the end of the cartridge. The dispenser is now ready for use.
Squeeze the handle several times to extrude the material. After use, do not remove the MIXING TIP II as this will become the storage cap until the next use. When replacing the MIXING TIP II, rotate the collar on the mixing tip 1/4 turn anti-clockwise to align the V-shaped notch on the cartridge. Tilt the mixing tip downward and peel it away from the cartridge.
Remove and replace the old mixing tip immediately prior to the next use. Before attaching a new tip, gently extrude a small amount of material to ensure that base and catalyst are flowing evenly from both openings. If the materials fail to extrude, remove any hardened materials on the end of the cartridge.
To replace the cartridge, lift the release lever and retract the plunger fully. Remove the empty cartridge by lifting the cartridge holder and loading a new one into the dispenser.
Yes, the ET Dental Dispensing Gun is compatible with the Waldent A-silicone light body kit. This ensures efficient and precise dispensing of the silicone material during dental procedures.
The ET Dental Dispensing Gun is designed to accommodate multiple ratios through the use of different variants. For instance, the 1:1/2:1 variant is engineered to work with both 1:1 and 2:1 type of cartridges, allowing users to apply equal parts or twice as much part A versus part B in a single application. On the other hand, the 1:4 variant is compatible with 1:4 and 1:10 type of cartridges, enabling users to mix epoxies or adhesives with varying ratios based on the specific requirements of the task. This design provides users with the flexibility to handle different ratio applications using a single dispensing gun.
Yes, ET Dental 4:1 dispensing gun is compatible with 3M Protemp 4 Temporization Material.
Yes, the ET Dental Dispensing Gun 1:1 is suitable for the Neoendo Additional Silicone Light Body Kit.
The ET Dental Dispensing Gun has specific compatibility based on the type of materials and cartridges. The ET Dental 1:1 dispensing gun is designed to work with Light body impression materials and bite registration materials cartridges that have a round neck. On the other hand, the ET Dental 1:4 dispensing gun is compatible with Temporary crown and bridge materials cartridges with a round neck. It’s important to match the type of dispensing gun with the appropriate cartridges for effective and accurate dispensing.
The ET Dental Dispensing Gun is specifically designed for use with 50ml cartridges. Its design ensures efficient and precise dispensing of materials, making it suitable for various applications in a controlled manner.
It offers direct delivery of material while eliminating the need for mixing pads and messy cleanup.
4:1 Impression gun is used to discharge the crown & bridge materials from cartridges. While 1:1 Impression gun is used to discharge the impression materials and bite registration materials from cartridges.
Impression material hand dispense guns are a convenient way to add impression materials to impression trays. Usually made of plastic, these handheld tools attach to a cartridge of impression material and an impression material dispensing tip.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.